It sounds like you're experiencing an issue with your device after booting it with a specific module active. The repeated soft boot and the subsequent disconnection of sensors indicate a possible conflict or malfunction related to the module. To troubleshoot this, consider the following steps:

  1. Check Module Compatibility: Ensure that the module you're using is compatible with your device's hardware and firmware version. Sometimes, using an incompatible module can cause system instability.
  2. Review Module Configuration: Verify that the module is configured correctly. Incorrect settings might lead to unexpected behavior, including repeated reboots and sensor failures.
  3. Update Firmware: Ensure that your device's firmware is up to date. Manufacturers often release updates to fix known issues and improve compatibility with new modules.
  4. Test with Minimal Configuration: Try booting your device with only the essential modules loaded. This can help determine if the issue is caused by the module itself or by a conflict with another module.
  5. Check for Overheating: Overheating can cause various issues, including unexpected reboots. Ensure that your device has adequate cooling and that the module isn't generating excessive heat.
  6. Consult Documentation and Support: Refer to the module's documentation for any specific troubleshooting steps. If the problem persists, consider reaching out to the module's support team for assistance.
  7. Monitor System Logs: Check your device's system logs for any error messages or warnings that can provide more insight into the issue.

If none of these steps resolve the problem, it might be necessary to contact the module's developer or your device manufacturer for further assistance. They may be able to provide a solution or identify if the issue is a known bug that needs a specific fix.