To install Zygisk-Next-1.0.5-305-d463cbb-release.zip on BlissOS, you will need to follow these steps. Note that these instructions are for a PC and assume you have BlissOS installed on your device. If you haven't installed BlissOS yet, please refer to the official BlissOS installation guide.

Step 1: Enable USB Debugging

  1. Go to the Settings on your BlissOS device.
  2. Scroll down and tap on About phone.
  3. Tap on Build number seven times until you see a message that says 'Developer mode has been enabled'.
  4. Go back to the main Settings menu.
  5. Tap on Developer options.
  6. Enable USB debugging.

Step 2: Install ADB and Fastboot

  1. Download the ADB and Fastboot package from the official Android Developers website.
  2. Extract the downloaded file to a folder on your PC.
  3. Connect your BlissOS device to your PC using a USB cable.
  4. Open a command prompt or terminal window and navigate to the folder where you extracted ADB and Fastboot.
  5. Type adb devices to check if your device is recognized. You should see your device listed.

Step 3: Install Zygisk

  1. Download the Zygisk-Next-1.0.5-305-d463cbb-release.zip file to your PC.
  2. On your BlissOS device, go to Settings > Apps > Special app access > Storage access and grant storage access to the file manager you are using.
  3. Copy the Zygisk-Next-1.0.5-305-d463cbb-release.zip file to your BlissOS device.
  4. Open a command prompt or terminal window on your PC and navigate to the folder where you extracted ADB and Fastboot.

  5. Use the following command to install the Zygisk zip file:

    adb install -r Zygisk-Next-1.0.5-305-d463cbb-release.zip
  6. Follow any on-screen instructions on your BlissOS device to complete the installation.

Step 4: Verify Installation

  1. Once the installation is complete, you can verify that Zygisk is installed by going to Settings > Apps and looking for Zygisk in the list of installed apps.

If you encounter any issues during the installation process, please ensure that your device is properly connected to your PC and that you have the correct ADB and Fastboot drivers installed. If the problem persists, you may need to consult the official documentation or seek help from the Zygisk community.